- Compatible with incandescent, halogen, compact fluorescent (CFL), fluorescent, LED lighting, and motors up to 1/8 hp
- Modes include: always off, always on, and motion activated
- On-time is adjustable from 5 to 30 minutes
- Photocell allows switch to operate based on existing lighting to save energy
Your home's switches can now be transformed to motion sensing lights. Replace your existing switches with this PIR sensor and you'll be able to control your light by simply walking into the room. When in AUTO mode, the sensor will turn the light on and off based on the detection of motion to ensure lights will only be on while the room is occupied, saving energy. The amount of time the light stays on after is detects motion is adjustable from 5, 10, 20, or 30 minutes. A photocell within the switch also evaluates the current amount of light to determine whether or not the lights should be turned on. If it senses that there is an ample amount of existing light in the room the switch will not turn on the light, even if it detects motion. You can also easily switch to ON or OFF mode if you don't want to use the switch as a motion detector by sliding the button located on the front of the switch.
This product is also available in white, sold separately.
|Manufacturer Product No.
||120VAC, 60 Hz
||AWG#18 (UL Recognized)
||Up to 500 Watts Incandescent
Up to 400 Watts Fluorescent
UP to 1/8 hp Motor Load
||55 to 85 degrees F
||Up to 30 feet
||1.66" W x 1.72" D x 4.07" H